CPVC Easyfit True Union Ball Valve

To make the ball round and smooth, the No.1 CPVC Easyfit True Union Ball and Spring Check Valve is rotated and grounded to a precise tolerance. This reduces torque requirements and makes handling easier. Unions are designed to be completely closed. A wide range of water treatment and chlorination applications benefit from the use of these valves.

EasyFit True Union Ball and Spring Check Valves are checked for several quality factors before they are shipped to a client. While manufacturing in our avant-garde facility, our experts take care to employ the latest techniques and technology. Moreover, they follow the industry norms when it comes to the production of valves. It has outstanding acidic, caustic and chemical resistance.

Acid and corrosive substances are used as an alternative to stainless steel systems in many situations where corrosion resistance is required. In addition to the chemical manufacturing of CPVC True Union Ball Valves, they are used in water purification, plating and metal processing, pulp and paper manufacturing, refining, and power stations.

The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded
shutter. Easyfit check valves stand out for the innovative installation method that guarantees reliable service over time. This valve is also equipped with the customisable Labelling System.

• Connection system for solvent weld and threaded joints
• Valve material compatibility (PVC-U) with water conveyance, drinking
water and other food substances according to current regulations

• PN16 True Union valve body made for PVC-U injection moulding and Eu-
ropean Directive 2014/68/EU (PED) compliant for pressurised equipment.

ISO 9393 compliant test requirements
• Fully interchangeable with VXE and VEE DN 10÷50 ball valve models
• Union nuts with rack for tightening adjustment via Easyfit handle or via
Easytorque adjustment kit (available as accessories)
• Vertical (preferable for SXE model) and horizontal installation potential

Technical specifications
Construction	SXE: Easyfit True Union ball check valve with locked carrier. SSE: Easyfit True Union spring check valve
Size range	DN 10 ÷ 50
Nominal pressure	PN 16 with water at 20 °C
Temperature range	0 °C ÷ 60 °C
Coupling standards	Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling capacity according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741. Thread: ISO 228-1, DIN 2999, ASTM D 2464, JIS B 0203.
Reference standards	Criteri Costruttivi: EN ISO 16137, EN ISO 1452, EN ISO 15493 Metodi e requisiti dei test: ISO 9393 Installation criteria: DVS 2204, DVS 2221, UNI 11242
Valve material	PVC-U
Seal material	EPDM, FKM
Spring material (SSE)	Available in STAINLESS steel 316, Hastelloy C276, A316 PTFE encapsulated (DN 32, DN 40 and DN 50 only)

DUAL BLOCK 3-WAY BALL VALVE

PRESSURE VARIATION ACCORDING TO TEMPERATURE

For water and harmless fluids to which the material is classified as CHEMICALLY RESISTANT. In other cases, a reduction of the nominal PN pressure is required (25 years
with safety factor).

PRESSURE DROP GRAPH

KV 100 FLOW COEFFICIENT

The Kv 100 flow coefficient is the Q flow rate of litres per minute of water at a temperature of 20°C that will generate Δp= 1 bar pressure drop at a certain valve position. The Kv100 values shown in the table are calculated with the valve completely open.

DN	10	15	10	25	32	40	50
Kv100l/min	172	152	258	433	643	928	1343

MINIMUM VALVE SEALING PRESSURE

The PVC-U SXE valve can only be used with liquids with specific weight under 1.37g/cm3

DN	10	15	20	25	32	40	50
SXE(bar)	0,2	0,2	0,2	0,2	0,2	0,2	0,2
SSE(bar)	0,08	0,08	0,08	0,08	0,08	0,08	0,08

SXEIV

Easyfit ball check valve with female ends for solvent welding, metric series

d	DN	PN	E	H	L	Z	g	EPDMcode	FKMcode
16	10	16	54	82	14	54	145	SXEIV016E	SXEIV016F
20	15	16	54	82	16	50	148	SXEIV020E	SXEIV020F
25	20	16	63	91	19	53	190	SXEIV025E	SXEIV025F
32	25	16	72	103	22	59	300	SXEIV032E	SXEIV032F
40	32	16	85	120	26	68	460	SXEIV040E	SXEIV040F
50	40	16	100	139	31	77	675	SXEIV050E	SXEIV050F
63	50	16	118	174	38	98	1080	SXEIV063E	SXEIV063F

1 Union nut (PVC-U – 2)
2 End connector (PVC-U – 2)
3 Socket seal O-Ring (EPDM,FKM – 2)
4 Body (PVC-U – 1)
5 Tag holder (PVC – 1)
6 Transparent protection plug(PVC – 1)

7 SXE Ball (PVC-U – 1)
7 SSE Shutter (PVC-U – 1)
8 Gland packing ring (PVC-U – 1)
9 SXEBall seat O-Ring (EPDM, FKM- 1)
9 SSE Shutter gasket (EPDM, FKM – 1)
10 Ball seat carrier (PVC-U – 1)

11 Radial seal O-Ring (EPDM,FKM- 1)
12 Spring (STAINLESS steel* – 1)

* Also available made of Hastelloy C276 or A316 PTFE encapsulated (for DN 40 and DN 50 only)
The component material and quantity supplied are indicated in the parentheses.