PPH valves are recognised for being long-lasting, rust-resistant, and simple to install. PPH, or polypropylene homopolymer, is a thermoplastic material used to fabricate flanges and free flanges, particularly in the industrial chemical industry and for the management of fluids under pressure at high temperatures (up to 100°).
It has strong chemical resistance, excellent thermal stability, and mechanical resilience, even when subjected to stress. It is the appropriate material for producing goods such as flanges and free flanges due to its low specific weight and long-time duration. PPH is also suitable for contact with foodstuffs due to its low conductivity and abrasion resistance. Our company is one of the leading brands in the business when it comes to providing high-quality PPH Valves Manufacturer company in India.
Uses of PPH Valves and PPH Pipe Fittings System, it is utilised in a wide range of applications, including industrial, consumer products, and display. Chemical tanks, structural tanks, liners, and coverings are all made out of polypropylene. Industrial battery covers, pump components, and impellers are some of the other typical uses. Hygienic cladding is another application for polypropylene sheeting.
This FDA-approved plastic material is suitable for food processing applications and components. Polypropylene is a cost-effective material that may be rendered transparent when left uncoloured; its natural finish is a milky white.
It is suited for a broad range of industrial and consumer uses, including the manufacturing of point-of-purchase (POP) displays, battery covers, chemical tanks, and complicated pump components, among others. Another benefit of PPH valve is its ability to be manufactured in a variety of ways. Several fabrication processes may be used to easily machine and manufacturer of the material.
To get more information about this website click here: PetronThermoplast.Com
Density | |
---|---|
Test method | ISO 1183 – ASTM D792 |
Unit of measurement | g/cm3 |
Value | 1.38 |
Modulus of elasticity | |
Test method | ISO 527 |
Unit of measurement | MPa = N/mm2 |
Value | 3200 |
IZOD notched impact strength at 23°C | |
Test method | ASTM D256 |
Unit of measurement | J/m |
Value | 50 |
Ultimate elongatio | |
Test method | ISO 527 |
Unit of measurement | % |
Value | 50 |
Shore hardness | |
Test method | ISO 868 |
Unit of measurement | Shore D |
Value | 80 |
Tensile strength | |
Test method | ISO 527 |
Unit of measurement | MPa = N/mm2 |
Value | 50 |
VICAT softening point (B/50) | |
Test method | ISO 306 |
Unit of measurement | °C |
Value | 76 |
Heat distortion temperature HDT (0.46 N/mm2) | |
Test method | ASTM D648 |
Unit of measurement | °C |
Value | 86 |
Thermal conductivity at 23° C | |
Test method | DIN 52612-1 – ASTM C177 |
Unit of measurement | W/(m °C) |
Value | 0.16 |
Coefficient of linear thermal expansion | |
Test method | DIN 53752 – ASTM D696 |
Unit of measurement | m/(m °C) |
Value | 8 x 10-5 |
Limiting Oxygen Index | |
Test method | ISO 4859-1 – ASTM D2863 |
Unit of measurement | % |
Value | 45 |
Production of the PVC-U lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with ISO 14001. All products are made in accordance with the quality guarantee system in compliance with ISO 9001.
• ANSI B16.5 |
Pipe flanges and flanged fittings-NPS 1/2 to NPS 24 mm / inch |
• ASTM D 2464 |
Standard Specification for Threaded Poly Vinyl Chloride (PVC) Plastic Pipe |
Fittings |
• ASTM D 2467 |
Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe Fittings, |
Schedule 80 |
• BS 10 |
Specification for flanges and bolts for pipes, valves and fittings |
• BS 1560 |
Flanges for pipes, valves and fittings (Class designated). Steel, cast iron |
and copper alloy flanges. Specification for steel flanges |
• BS 4504 |
Flanges for pipes, valves and fittings (PN designated). |
• DIN 2501 |
Flanges, dimensions |
• DIN 2999 |
Whitworth thread for threaded pipes and fittings |
• DIN 3202 |
Overall valve dimensions |
• DIN 3441-2 |
Dimensions of PVC-U ball valves |
• DIN 8062 |
Dimensions of PVC-U pipes |
• DIN 8063 |
Dimensions of PVC-U fittings |
• DIN 16962 |
PVC-C fittings for butt-welding or socket fusion, dimensions |
• DIN 16963 |
Pipe connections and pipe components for pressurised fluids in HDPE |
• DVS 2204 – 2221 |
Solvent welding of thermoplastic materials PVC-U |
• EN 558-1 |
Industrial valves – face-to-face and centre-to-face dimensions of metal |
valves for use in flanged pipe systems – Part 1: PN designated valves |
• EN 1092-1 |
Flanges and their joints – Circular flanges for pipes, valves and accessories |
– Part 1: Steel flanges, PN designated |
• EN ISO 1452 |
Characteristics of fittings and pipes in PVC-U for piping systems intended |
for water supply |