PPH SOLENOID VALVE

•2-Way PVC-U body
• Installation flexibility and ease of maintenance: high-performance solenoid
electric actuator designed to exceed 5 million maintenance-free operating
cycles
• Adjustable circular section coil with IP65 protection class.
• Integrated override with the possibility of being installed in 3 different positions.
• Lever shutter in EPDM or FKM and lever in stainless steel.
• DIN 43650 electrical connector supplied as standard: includes LED indicator light
and rectifier (in the case of an AC coil).

PPH SOLENOID VALVE

Technical specifications – S1-S3
Construction	2-way solenoid valve
Si range	S12: DN 4-6-8S22: DN 8-10-15
Temperature range	0 °C ÷ 50 °C
Coupling standards	Solvent welding: EN ISO 1452 EN ISO 493 ISO 727 DIN 8063 ASTM D2467 BS 4346-1 ISO 727-2. Can be coupled to pipes according to ISO 161/1 DIN 8062 ASTM D11785/76 BS 3506 BS 3505 Thread: ISO 228-1 DIN 2999 ASTM D 2467 (NPT) BS 21 BS 10226 ISO 7-1
Valve material	PVC-U
Seal material	EPDM FKM

(1.)Installation flexibility and ease of
maintenance: high-performance
solenoid electric actuator with
internal moving parts designed
to exceed 5 million maintenancefree operating cycles Adjustable
circular section coil with IP65
protection class.

(2.) DIN 43650 electrical connector
supplied as standard: includes LED
indicator light and rectifier (in the
case of an AC coil).
(3.) Lever shutter in EPDM or FKM and
lever in stainless steel.

Suitable for use with aggressive
fluids: no metal component
in contact with the fluid or
the external environment; all
the screws are covered by
PE protection plugs.
(5.) Emergency override.

TYPE S12 2-WAY VALVE PERFORMANCE

DN	4	6	8
PN	6	4	2
Kv(l/min)*	6.7	12.1	15.3

TYPE S22 2-WAY VALVE PERFORMANCE

DN	8	10	15
PN	6	4	2
Kv(l/min)*	27.5	34.2	58.3

Q flow of litres per minute of water at a temperature of 20°C that will generate ∆p= 1 bar pressure drop
at a certain valve position.
The values shown in the table are calculated with the valve completely open.

TYPE S22 2-WAY VALVE PERFORMANCE

DN	8	10	15
PN	6	4	2
Kv(l/min)*	27.5	34.2	58.3

GENERAL CHARACTERISTICS

Functional characteristics	lever shutter
S12 and S22 2-way valve control functions	NC
Body material	PVC-U
Seal material	EPDM or FKM.
Maximum environmental temperature	50° C
Maximum working fluid viscosity	38 cSt
Service	100% ED
Close time	~ 20 ms
Open time	~ 20 ms
Alternating current voltages	24V – 110V* – 230V
Frequency	50-60 Hz
Direct current voltages	24 V
Voltage tolerance	± 10%
S12 absorbed power	10 W
S22 absorbed power	20 W
Electrical protection	IP 65
Electrical connection	DIN 43650 connector with LED (1)
Coil thermal class	F (155°C)
Installation	In any position
Coil rotation	over 360°

*Voltage upon request
(1) Connector with internal electronic circuit specific to coil used

S12AV
2 way solenoid valve with BS female union ends for solvent welding.
Function: Normally closed

d	DN	A	B	C	H	H1	L	Z	E	M	g	EPDM Code	FKM Code
1/4”	4-6-8	24	100	103	92	46	16	60	42	52	400	See code page	See code page
3/8”	4-6-8	24	100	103	98	49	19	60	42	52	400	See code page	See code page

S22AV
2 way solenoid valve with ASTM female union ends for solvent welding.
Function: Normally closed

d	DN	A	B	C	H	H1	L	Z	E	M	g	EPDM Code	FKM Code
3/8”	8-10-15	34	115	130	109	55	19	71	54	67	1000	See code page	See code page
1/2”	8-10-15	34	115	130	116	58	22	72	54	67	1000	See code page	See code page